It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

 

Standard equipment

• Electrical cabinet

• Automatic condensate drain

• 2 analyzers

• Thermostat

• 1 Parker Enoxy SA 708 oxygen membrane

​

Flowrate

EAN 32 - 315 l/min

EAN 36 - 235 l/min

​

​

Engine: Electric three-phase 400 V - 50 Hz

Engine power: 7.5 kW - 10 Hp

Charging rate: 950 l / min - 57 m3 / h - 33.5 CFM

Working pressure: 10 bar - 145 PSI

Net weight (approx.): 215 kg - 474 lb

Dimensions (W x D x H): 75 x 85 x 139 cm - 29.5 x 33.5 x 54.7 in.